X30 Oil Pumps



MARSHALSEA HOME


PUMPS, MOTOR PUMP UNITS

Water/Glycol pumps

Oil pumps


PRESSURE INTENSIFIERS

Topside use

Subsea applications


VALVES

Relief valves

Thermal relief

Directional valves


GENERAL

About us

Quality

Contact

Privacy




HYDRAULIC OIL PUMPS

Type SM

Type LM

Type X

Type X30

  
Rotating swash plate design
Pressures up to 870 bar
Flows up to 33.44 l/m (8.83 USg/m)
Horizontal or Vertical Mounting

The Type X30 hydraulic axial piston pump is of a 30 kW rotating swash plate design and can deliver pressures up to 870 bar.

To suit your fluid compatibility, environment, maintenance and value requirements, these pumps are available with all stainless steel or all carbon steel external components.

The X30 pump is available with 3 or 6 pistons, providing flow rates up to 33.44 l/m (8.83 USg/m) as listed in the table below.

Installation

Rotation is bi-directional and the pump may be mounted horizontally or vertically.

A suction filter of 150 microns or better should be used. Finer filtration is desirable for the pump life, but is important that the inlet flowrate to the pump is not restricted and no more than -2 in.Hg is measured in the suction pipework under pumping conditions. Where possible a positive pressure should be maintained in the suction pipework under flowing conditions. When the pump is stationary the suction line should be kept under positive pressure to allow priming.

Fluids

These pumps are designed to run on mineral oils with an operating viscocity between 15 and 100 cst. Consult the factory for viscocities outside this range.

Temperature

The operating temperature range is –20°C; to +60°C (Ambient).

Weight

59 Kg



Part Number Cylinders Flow Flow @ 1450 RPM Flow @ 1750 RPM Pressure
cc/rev l/m Usg/m l/m Usg/m bar
X30-xx-00402-0870-3-4-NC-VH-xx-xx 3 4.02 5.83 1.539 6.52 1.720 870
X30-xx-00472-0870-3-4-NC-VH-xx-xx 3 4.72 6.84 1.806 8.26 2.180 870
X30-xx-00547-0870-3-4-NC-VH-xx-xx 3 5.47 7.93 2.095 9.58 2.528 870
X30-xx-00587-0870-3-4-NC-VH-xx-xx 3 5.87 8.51 2.247 10.27 2.712 870
X30-xx-00671-0870-3-4-NC-VH-xx-xx 3 6.71 9.73 2.568 11.74 3.099 870
X30-xx-00851-0870-3-4-NC-VH-xx-xx 3 8.51 12.34 3.258 14.89 3.932 870
X30-xx-00804-0870-6-4-NC-VH-xx-xx 6 8.04 11.66 3.078 14.07 3.715 870
X30-xx-00944-0870-6-4-NC-VH-xx-xx 6 9.44 13.68 3.612 16.51 4.360 870
X30-xx-01094-0870-6-4-NC-VH-xx-xx 6 10.94 15.87 4.189 19.15 5.056 870
X30-xx-01174-0870-6-4-NC-VH-xx-xx 6 11.74 17.02 4.494 20.54 5.424 870
X30-xx-01341-0765-6-4-NC-VH-xx-xx 6 13.41 19.45 5.135 23.48 6.198 765
X30-xx-01702-0600-6-4-NC-VH-xx-xx 6 17.02 24.68 6.516 29.79 7.864 600
X30-xx-01911-0535-6-4-NC-VH-xx-xx 6 19.11 27.71 7.315 33.44 8.829 535

Additional Options




External Construction

00 - Stainless Steel Construction
01 - Carbon Steel Construction

Inlet Connection Options

05 - 1" BSP Female Inlet
10 - 1" NPT Female Inlet (With Adapter)

Outlet Connection Options

03 - 1/2" BSP Female Outlet (Pressures up to 700 bar)
04 - 3/4" BSP Female Outlet (Pressures up to 700 bar)
08 - 1/2" NPT Female Outlet (Pressures up to 800 bar)
09 - 3/4" NPT Female Outlet (Pressures up to 800 bar)
13 - 9/16" MP Female Outlet
15 - 1" MP Female Outlet


Dimensions



(c) Marshalsea Hydraulics Limited – a member of the Bifold Fluidpower group of companies.

Website by Big Bird Design